FILL, FAIR, RESHAPE, REPAIR
READY TO SAND IN 4 HOURS
NO SAGGING ON VERTICAL OR OVERHEAD SURFACES
EASY TO SAND SMOOTH WITH NO PINHOLES
TotalFair Epoxy Fairing Compound
TotalFair Epoxy Fairing Compound
SKU: 434282
This lightweight 2-part marine epoxy fairing compound is perfect for reshaping, filling, and fairing. With an improved formula for less sagging and easier sanding, TotalFair fairing putty is ideal for boat building and repairs above and below the waterline on fiberglass, wood, aluminum, and steel. TotalFair dries fast and sands smooth. Color coded components for easy 1:1 mix ratio.
Regular price
$44.99 - $124.99
Regular price
$44.99
Sale price
$44.99
Regular price
Unit price
per
Free Shipping On All Orders
FILL, FAIR, RESHAPE, REPAIR
READY TO SAND IN 4 HOURS
NO SAGGING ON VERTICAL OR OVERHEAD SURFACES
EASY TO SAND SMOOTH WITH NO PINHOLES
Couldn't load pickup availability
Description
Important Application Notes
Safety Precautions
Easy to mix – green means it’s ready to go
With an improved formula for mixing, application, and sanding, TotalFair is the ideal solution for marine repairs, recreational vehicle improvements, fabrication, and woodworking. Ever had epoxy or fairing compound sag or go on like soggy sawdust because it wasn't mixed completely? That won’t happen with TotalFair because it's easy to see exactly when it's ready to use with color-coded components. The epoxy resin is yellow, and the hardener is blue (with some green expected from oxidation). Wearing protective gloves, mix the two parts together at a 1:1 ratio. Mix, fold, smear, scrape, repeat. Stop when you get a uniform, green-colored paste. That’s it. No complicated measuring or guessing. Just green. Once it's green and swirl-free, you’re ready to shape, fill, and fair dents, chips, gouges, cracks, and other unsightly things standing in the way of a gloriously smooth, ready-to-prime surface.
This fairing putty stays put
TotalFair is light and easy to work with to repair boats, kayaks, RVs, and trailers. The advanced, non-sagging formula formula spreads and hangs, staying where you put it. Even overhead, upside down, and sideways. Just pull or feather to a fine edge and a smoother surface.
Creates a smooth, hard, flexible finish
The TotalFair finish is smooth, even, and pinhole-free for strong, long-lasting bonds above or below the waterline. Make it even smoother by sanding after it cures. Which is quick – just 3 hours at 90°F. TotalFair has a high tolerance for flexing, especially on the hull. It adheres aggressively, distributes stress evenly, and it won’t crack or break free. To suit repairs ranging from a few minor cracks to a slew of imperfections, our marine fairing compound comes in pint, quart and gallon sizes.
TotalFair Details
- Lightweight, 2-part marine epoxy fairing compound
- New formula features thicker consistency for better control while scooping, mixing, and spreading
- Use above and below the waterline for reshaping, filling, fairing, and repairing.
- Works on horizontal, vertical, inclined, and overhead surfaces without sagging.
- No-mess, easy-mix, color-coded formula dries fast. Easy to sand once cured.
- Apply fairing compound to fiberglass, wood, steel, and aluminum.
- Sizes: Available in two-part Pint, Quart, and Gallon Kits. Each kit contains Resin Part A (yellow) and Hardener Part B (blue).
- 2-Pint kit includes one pint Part A & one pint Part B. 2-Quart kit includes one quart Part A & one quart Part B. Gallon kit includes half-gallon Part A & half-gallon Part B.
- IMPORTANT: TotalBoat Gelcoat should not be applied directly over TotalFair or the gelcoat will not cure properly. Instead, use TotalProtect over TotalFair, before applying Gelcoat.
Important Application Notes
- Some oxidation of the blue hardener is expected and does not impact the mixing or application of TotalFair. If hardener arrives with a light green oxidized tint, simply mix with the resin to achieve proper color and consistency.
- Gelcoat should not be applied directly over TotalFair or the gelcoat will not cure properly. Instead, apply TotalBoat TotalProtect Epoxy Barrier Coat Primer over TotalFair, and allow to cure fully before applying Gelcoat. Primers are sold separately.
- When filling holes or gouges: Filling holes up to 3/4" thick may need a second pass, once cured. When fairing a large gouge (maximum depth fill), a 6:1 width to depth ratio is recommended per application. For deep/narrow areas that exceed 6:1, just apply TotalFair in stages, building up each time.
- Do not apply TotalFair over 1-component previously painted surfaces. If you are not sure what the previous coating is, remove it before applying TotalFair.
- Storage below the recommended temperature range can cause crystallization of the resin and hardener. If TotalFair crystallizes, simply close the containers completely and set them in a sealed plastic bag, with no air. Place the sealed bag in a bowl of warm water (125-150°F) for a couple of hours. This action will undo the crystallization, and the product will be the proper consistency for use.
- In between uses, cover the remaining material in each container with plastic sheeting before securing the lids tightly. This helps extend the shelf life and minimize further oxidation.
Safety Precautions
- Wear protective gloves when mixing TotalFair.
- Wear a proper respirator when sanding.
FREQUENTLY BOUGHT TOGETHER
TotalProtect Epoxy Barrier Coat Primer
Regular price
$51.99
Sale price
$51.99
Regular price
Unit price
per
SPECIFICATIONS
TECHNICAL DATA
APPLICATION DATA
- Application Method: Spreader, trowel
- Application Temperature: 50-100°F
- Working Time (150g mass, minimum): 15-20 minutes @ 90°F, 30 minutes @ 70°F, 45-60 minutes @ 50°F
- Tack-Free Time: 1 hour @ 90°F, 2 hours @ 70°F, 4 hours @ 50°F
- Dry Time to Sand: 3 hours @ 90°F, 6-8 hours @ 70°F, 12 hours @ 50°F
- Shelf Life: 1 year, minimum, if stored properly
PHYSICAL DATA
- Mixed Appearance: Green paste
- Mix Ratio by Volume: 1A:1B (one part Part A Resin (yellow) to one part Part B Hardener (blue))
- Sag Resistance: >1" (Vertical Surface Test)
- Storage Temperature: 59-77°F
PREP & CLEANUP SOLVENTS
- Surface Prep Solvent: Fiberglass, Steel, and Previously Painted Surfaces - Acetone or denatured alchohol; Aluminum - TotalBoat Aluminum Boat Etch Wash; Oily Hardwoods - acetone
- Cleanup Solvent: Clean up with acetone before product is cured. Once cured, it must be removed mechanically.
HOW IT COMPARES
-
TotalFair Epoxy Fairing Compound
- Best for:
- Composition:
- Substrates:
- Mix ratio:
- Mixed/cured color:
- Application methods:
- Application temperature/RH:
- Working time:
- Sandable time:
- Finish/topcoat with...
- UV resistant?
- BPA free?
- Units of measure:
- THIS ITEM
-
TotalFair Epoxy Fairing Compound
- Best for: Reshaping, filling, fairing for boat building and repairs
- Composition: Epoxy-based fairing compound
- Substrates: Fiberglass, wood, aluminum, steel, and previously applied epoxy products or two-component urethanes in good condition
- Mix ratio: 1A:1B
- Mixed/cured color: Green
- Application methods: Spreader, Trowel
- Application temperature/RH: 50-100°F
- Working time: 150g mass, minimum - 15-20 minutes @ 90°F; 30 minutes @ 70°F; 45-60 minutes @ 50°F
- Sandable time: 3 hours @ 90°F; 6-8 hours @ 70°F; 12 hours @ 50°F
- Finish/topcoat with... Paint, primer, epoxy primer, or more TotalFair. DO NOT apply gelcoat directly to TotalFair. It will not cure properly. Before applying gelcoat, overcoat TotalFair with an epoxy barrier coat or epoxy surfacing primer.
- UV resistant? No
- BPA free? No
- Units of measure: 2 Pint Kit, 2 Quart Kit, Gallon Kit
-
FixWood Wood Repair Epoxy Putty
- High-strength, waterproof, permanent repairs to rotted or damaged wood
- Epoxy-based putty
- Wood
- 1A:1B
- Tan
- Shape by hand or using tools.
- 50-100°F
- 30-35 minutes @ 72°F
- Less than 6 hours @ 72°F
- Stain it or coat it with 1-part or 2-part polyurethane paint or varnish.
- No
- No
- 2 Pint Kit, 2 Quart Kit
-
Polyester Fairing Compound
- Fairing fiberglass decks and hulls (above the waterline only); cosmetic filling on composite surfaces to repair shallow dings, cracks, dents, and gouges; repairing fiberglass parts, molds, and plugs; filling print-through or porosity on composite surfaces; fairing joints in sheet metal
- Polyester resin-based fairing compound
- Fiberglass, gelcoat, composites, sheet metal
- For a proper cure, add 1-2% MEKP catalyst (included) to fairing compound.
- Off White
- Spreader, Trowel
- 50-95°F; 0-90% RH
- Variable. At 77°F, adding 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound will provide a working time of 10-15 minutes, and will cure in 20-30 minutes.
- Depends on temperature, amount of catalyst, and mass of fairing compound. Example: 20-30 minutes @ 77°F for a 100g mass catalyzed with 1% MEKP.
- For UV protection, TotalBoat Polyester Fairing Compound must be finished with gelcoat, or primed and painted. For underwater applications where this fairing compound may be exposed to water, always barrier coat with TotalBoat TotalProtect, to prevent water intrusion.
- No
- No
- Quart Kit, Gallon Kit
-
Polyester Structural Marine Repair Putty
- Joining and filleting fiber-reinforced plastic (FRP) parts, bonding dissimilar materials such as metal and wood, radius forming, filling larger voids and cracks in composites, and fabricating composite parts
- Polyester resin-based repair putty
- FRP composites, core materials, wood
- Add 1-2% MEKP catalyst (included) to repair putty.
- Blue
- Spreader, Trowel
- 50-95°F; 0-90% RH
- For a 100g mass, catalyze with 1% MEKP for approximately 15-20 minutes of working time at 70°F (14 drops of MEKP catalyst per ounce of structural repair putty).
- For applications where this product will not be laminated over, a polyester resin air dry solution can be added at the rate of 1 ounce per quart of putty before catalyzing.
- Gelcoat with wax, Polyester Finishing Resin
- No
- No
- Quart Kit, Gallon Kit
YOU MAY ALSO LIKE
5:1 Traditional Epoxy Resin Kits
Regular price
$66.99
Sale price
$66.99
Regular price
Unit price
per
Polyester Structural Marine Repair Putty
Regular price
$42.99
Sale price
$42.99
Regular price
Unit price
per
ADDITIONAL PRODUCT INFORMATION
WHAT MOST PEOPLE ASK
FREQUENTLY ASKED QUESTIONS
-
What applications is TotalFair most appropriate for?
TotalFair is a 2-part epoxy putty fairing compound for reshaping, filling, and fairing. It can be used above and below the waterline on fiberglass, wood, steel, and aluminum. -
Can I apply gelcoat over cured TotalFair?
No. Gelcoat will not cure properly if applied directly to cured TotalFair. Before applying gelcoat, you must overcoat TotalFair with an epoxy barrier coat or epoxy surfacing primers, such as TotalBoat TotalProtect. The only alternative is to use TotalBoat Polyester Fairing Compound instead of TotalFair. -
Can TotalFair be applied over epoxy resin?
Yes. Make sure to get rid of any amine blush left from the curing epoxy resin first. This usually means scrubbing the cured epoxy with soap and water or a scotchbrite pad. -
Can TotalFair be applied over primers?
TotalFair can only be used over epoxy-based primers like TotalBoat 2-Part Primer or TotalBoat TotalProtect Epoxy Barrier Coat. It cannot be applied directly over TotalBoat Topside Primer or other 1-part primers. -
Does TotalFair require an epoxy barrier coat when used below the waterline, or can you paint right over it?
We strongly recommend applying TotalProtect Barrier Coat over TotalFair for maximum moisture resistance and paint adhesion before applying antifouling paint. -
Can TotalFair be used to repair gelcoat chips and cracks?
TotalFair is not a substitute gelcoat patch kit.This fairing material cannot be directly gelcoated over. You would need to grind out all cracks to a ‘V’ shape using a Dremel, fill with TotalFair, and apply an epoxy primer in order to apply gelcoat. -
Can TotalFair be applied to aluminum boats?
Yes, but we strongly recommend applying TotalBoat Aluminum Boat Etch Wash beforehand for maximum adhesion. -
Can TotalFair be stained?
No. This epoxy filler is not compatible with stains. -
What types of paint is this epoxy fairing compound compatible with?
TotalFair is compatible with latex, enamel, polyurethane, and other kinds of paint. Always prime first, for best results. -
What is the temperature range for applying this epoxy fairing compound?
The temperature range for application is 50°F – 100°F. The lower the temperature, the longer it will take to cure. -
The blue hardener has a green tint, is the formula impacted?
No, the hardener is still good to use. A green tint is expected, as it’s a result of oxidation and has no impact on mixing or application. Simply use the hardener in a 1:1 ratio with the yellow resin to achieve the proper color and consistency. -
Is TotalFair supposed to be green?
Yes, that is how you will know it’s ready for application. Mix the resin (yellow), and the hardener (blue) at a 1:1 ratio. Once it’s green, it’s ready to go. Upon full cure, TotalFair will be a uniform light green color. -
Once the 2 components are mixed, how long do I have to apply it?
Working life depends on temperature. The hotter it is, the shorter the time will be. 15-20 minutes at 90°F, 30 minutes at 70°F, and 45-60 minutes at 50°F. -
How long do I have to wait before sanding TotalFair?
We advise sanding as soon as it’s cured. At 80°F, it will only take 3 hours. Cooler temperatures will mean longer dry times, including 12 hours at 50°F. If it sits for more than 2 days, it can become harder to sand. Although TotalFair is a non-blushing epoxy product, we recommend washing cured TotalFair with water and mild soap before sanding or overcoating. -
What is the shelf life of TotalFair once opened?
If stored properly, TotalFair can last for at least one year. Store at 59-77°F, in a dry place with the included plastic film pushed back over the resin and hardener to minimize oxidation. If storing for longer than one month, we recommend covering it with poly sheeting or plastic wrap before putting the lid on. This will help keep out contaminants. Storing TotalFair in temperatures below 59°F causes crystallization.