High-gloss, one-part polyurethane marine topside boat paint is available in 22 popular colors. Advanced UV stabilizers ensure a long-lasting finish that won’t fade. Its combination of gloss, easy application, and durability is unmatched.
Regular price$49.99
Sale price
$49.99
Regular price
Unit price/ per
Free Shipping On All Orders
22 POPULAR COLORS
High-gloss and flat finishes in pints, quarts and gallons.
EASY TO APPLY
Apply by brushing, rolling & tipping, or spraying.
LONG-LASTING FINISH
UV-stable, flexible finish has great color retention and won't chip, fade, or peel.
CUSTOMIZE YOUR COLOR
Mix any of the Wet Edge colors to create your own.
Get glossy, professional-looking results without spraying
Wet Edge was created so anyone could easily paint their boat’s topsides with pride and not pay a premium to do it. Of course, you can spray it on if you want to, but simple rolling and tipping produce praiseworthy results. Just remember always to brush from the wet edge into new paint, then leave it alone and it’ll lay down flat, smooth, and glossy. Be careful you don’t get a big head from all the compliments. If you need to prime first, our high-solids TotalBoat Topside Primer was created expressly for use under Wet Edge.
Lay it on thin
To get Wet Edge to cure to a rock-hard, super shiny finish, you have to think thin. Coats, that is. It’s loaded with solids so you don’t need to lay it on thick to get better coverage. You wouldn’t want to either, because it won’t dry as fast as it should. For best color and finish, we recommend 2-3 thin coats.
Very tough and very flexible
Wet Edge topside paint adheres to fiberglass and wood like wet on water, and expands and contracts effortlessly with your ever-shifting hull. Other one-part topside paints can lift, peel, or crack under this type of pressure.
Choose from 22 UV-stable colors or create your own
Consistency and UV stability are hallmarks of the available Wet Edge boat paint colors. From serene to bold and brilliant, these colors will always look as good as the day they were laid down. If you want to make your own color, just mix any of the existing Wet Edge boat paint colors.
Wet Edge Paint Details
Beautiful, shiny, long-lasting polyurethane marine topside paint with excellent resistance to weather, chemicals, and abrasion.
Unique formula allows hulls to expand & contract without finish lifting or cracking.
Brush or spray above the waterline on wood, fiberglass, and previously painted surfaces in good condition.
Compatible with flattening agents and non-skid additives.
Pint-size is ideal for painting boot stripes.
Pint Colors: Flag Blue, Black, White, Fire Red
Quart Colors: Aqua Mist, Black, Blue-Glo White, Classic Whaler Blue, Bristol Beige, Sand Beige, Fighting Lady Yellow, Fire Red, Flag Blue, Flat Gray, Flat White, Hatteras Off-White, Light Gray, Kingston Gray, Largo Blue, Flat Black, Off-White, Oyster White, Sea Foam, Sea Green, White, Yellow
Gallon Colors: Black, Aqua Mist, Blue-Glo White, Classic Whaler Blue, Bristol Beige, Sand Beige, Fire Red, Flag Blue, Hatteras Off-White, Oyster White, Light Gray, Kingston Gray, Largo Blue, Off-White, Sea Green, White, Yellow, Fighting Lady Yellow, Sea Foam, Flat White, Flat Black, Flat Gray
TotalBoat Wet Edge is easy to apply by brushing, rolling & tipping, or spraying. Advanced UV stabilizers ensure maximum color retention and a long-lasting finish.
PRODUCT IN ACTION
SEE HOW EASY IT IS TO APPLY WET EDGE
SPECIFICATIONS
TECHNICAL DATA
APPLICATION DATA
Application Method: Brush, Roll, or Spray
Recommended roller: We recommend a solvent-safe 1/8" foam roller, designed for leaving glossy surfaces without any stipple or lint. This includes products such as ArroWorthy Mighty Mini rollers, or foam rollers that fit on regular paint roller frames.
Do not apply with nap rollers. Nap rollers leave small hairs, as well as a stippled effect in the paint that will stand out once it cures, and will generally lay down too much paint for a proper cure.
Application Film Thickness: 1-2 mils dry @ 3 mils wet
Not recommended for steel without proper preparation, or aluminum unless properly etched and primed
Not designed for continuous submersion on boat bottoms that remain in the water longer than 72 hours
PHYSICAL DATA
Components: One
Finish sheen/gloss: High gloss (standard) (85-90°); Flattened (5-10°)
UV stable: Yes
PRIMER, THINNER, PREP & CLEANUP SOLVENTS
Primer: TotalBoat Topside Primer (NOTE: Wet Edge can also be applied over TotalBoat epoxy primer systems, including TotalProtect, 2-Part Epoxy Primers, and Aluminum Boat Barrier Coat. See technical data sheet for details.)
Cleanup solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
HOW IT COMPARES
Wet Edge Topside Paint
Best for:
Finish:
Interior/Exterior?
Primer:
Thinner:
Application methods:
Application temperature & humidity:
Number of coats:
Cleanup:
Coverage:
UV Resistant?
THIS ITEM
Wet Edge Topside Paint
Best for:
Painting wood and fiberglass boat hulls above the waterline
Finish:
High gloss (all colors); Flat (black, white, and gray only)
Interior/Exterior?
Interior and exterior (above the waterline only)
Primer:
TotalBoat Topside Primer (NOTE: Wet Edge can also be applied over TotalBoat epoxy primer systems, including TotalProtect, 2-Part Epoxy Primers, and Aluminum Boat Barrier Coat. See technical data sheet for details.)
Thinner:
TotalBoat Special Brushing Thinner 100 (brush/roll) or TotalBoat Spray Thinner 101 (spray)
Application methods:
Brush, roll and tip, or spray
Application temperature & humidity:
50-90°F; humidity 0-90%
Number of coats:
2-3 (minimum)
Cleanup:
TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
Coverage:
350-400 sq. ft. per gallon (approximately 80-100 sq. ft. per quart)
UV Resistant?
Yes
Elixir Enamel Topside Paint
Painting signage and wood, fiberglass & metal boat hulls above the waterline
Semi-gloss
Interior and exterior (above the waterline only)
No primer needed.
Water, if needed, up to 20%
Brush, roll and tip, or spray. For brushing, use a tapered polyester brush; for rolling, use a high-density foam roller cover.
50-90°F; humidity 0-90%
2-3 (minimum)
Soap and water
80-100 sq. ft. per quart (3 mils wet film thickness)
Yes
TotalTread Non-Skid Marine Deck Paint
Provides a non-slip surface on decks, docks, ramps, steps, cabin soles & other fibergalss and wood topside surfaces.
Flat, gritty
Exterior (above the waterline only)
TotalBoat Topside Primer (wood and previously painted surfaces; not needed on properly prepared fiberglass), TotalBoat 2-Part Epoxy Primer (Metals), TotalBoat TotalProtect Barrier Coat (Fiberglass/Metals), TotalBoat Aluminum Boat Barrier Coat (Metals)
Brushing/Rolling: TotalBoat Special Brushing Thinner 100, 5-10%, if needed; Spraying: TotalBoat Spray Thinner 101, 10-20%, if needed
Brush, roll, or spray
50-90°F; humidity 0-90%
Two; between coats, sand lightly with 220-grit sandpaper
TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
250-300 sq. ft. per gallon
Yes
TotalBilge Epoxy Bilge Paint
Painting bilges, bulkheads, lazarettes and locker areas
High gloss
Interior only
TotalBoat TotalProtect — only mandatory on metals, but may be used on properly prepared wood or fiberglass, if desired.
Brushing/Rolling: If needed, thin 5-10% with TotalBoat Special Brushing Thinner 100; Spraying: TotalBoat Spray Thinner 101, 10-20%
Brush, roll, or spray
50-95°F; humidity 0-90%
1-2; between coats, sand lightly with 100-150-grit sandpaper
TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep
250-300 sq. ft. per gallon
No
VIDEOS
Watch More Videos
Wooden Boat Build // Part 12: Painting the Boat // Roll & Tip Method
GET GLOSSY, PROFESSIONAL-LOOKING RESULTS WITHOUT SPRAYING
Wet Edge was created so anyone could easily paint their boat’s topsides with pride and not pay a premium to do it. Of course, you can spray it on if you want to, but simple rolling and tipping produce praiseworthy results. Just remember always to brush from the wet edge into new paint, then leave it alone and it’ll lay down flat, smooth, and glossy. Be careful you don’t get a big head from all the compliments. If you need to prime first, our high-solids TotalBoat Topside Primer was created expressly for use under Wet Edge.
This marine topside boat paint can be used on fiberglass, wood, or previously painted surfaces above the waterline.
Do you need to prime before applying Wet Edge?
For the best results, you should prime using TotalBoat Topside Primer. Keep in mind, Wet Edge topside boat paint can also be applied over TotalBoat epoxy primer systems, including TotalProtect, 2-Part Epoxy Primers, and Aluminum Boat Barrier Coat.
How do I apply this paint?
It’s best to use the ‘roll and tip’ method with a brush and roller. If you are applying the paint with a roller, we recommend using a solvent safe ⅛" foam roller, designed to leave glossy surfaces without any stipple or lint. If you are applying it with a brush, we suggest using a natural bristle or badger hair brush. You should not apply the Wet Edge Topside Paint with a nap roller because they leave small hairs, and will generally lay down too much paint for a proper cure. Wet Edge can also be sprayed.
How many coats should I apply?
For the best color appearance and finish durability, we recommend two to three thin coats.
How long should I wait before applying another coat?
On a mild day with low humidity, you may be able to get two coats applied in a day. Otherwise, we recommend 24 hours between coats.
How long does it take for polyurethane marine topside paint to fully dry?
The dry time to touch is 1.5 hours to 6 hours, depending on the temperature. The dry time to overcoat is also dependent on the temperature. It can take anywhere between 8 hours to 16 hours before it’s fully cured. Be sure to apply thin coats. Applying Wet Edge too thick may cause problems with drying.
WARNING: Certain TotalBoat Wet Edge colors can expose you to chemicals including titanium dioxide, ethylbenzene, silica crystalline, carbon black, and n-methylpyrrolidone, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Choosing a selection results in a full page refresh.
